Calculated Industries Scale Master Classic Bedienungsanleitung PDF herunterladen (Seite 10)

10 – Scale Master

Classic v3.0

Area and Volume

Finding Area

1) Roll the first dimension and press

[M1+]. A small “M” will appear in the

scale box display and the main display

will be cleared.

2) Roll the second dimension and press

[M2x]. The main display will be cleared.

3) Press [Rcl] [M2x]. This displays the linear

value stored in this register. The second

press of [M2x] will calculate and display

the area, which is the value stored in

[M1+] times the value stored in [M2x].

Finding Volume

1) Roll the first dimension and press [M1+].

2) Roll the second dimension and press

[M2x].

3) Storing a height value

(if you have pre-

viously set a height, skip to step 4):

a. T

o Roll and Store a Height:

i. Roll the third dimension and

press [Subtract/Count] and [M2x]

simultaneously. The display will

show the rolled value and the unit

of measure will begin flashing.

ii. If you do not want to change the

unit of measure, go to step iii. To

change the unit of measure, press

[M1+] until you reach the desired

unit.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Keine Kommentare

Calculated Industries Scale Master Classic Bedienungsanleitung Seite 10