Calculated Industries Scale Master Classic Bedienungsanleitung PDF herunterladen (Seite 9)

9 – User’s Guide

Rolling or Entering a Custom Scale

1) Press [Mode] until “1: CUS 1” appears

in the scale box display.

2) Press [Subtract/Count] and [Scale]

simultaneously.“

ROLL” will appear in the

main display. If you are entering a

scale, skip to step 4.

3) Roll desired dimension. “

ROLLING“ now

appears in the main display.

Note: For greater accuracy, you may want to roll

the known distance several times, then enter

the distance times the number of rolls (for

example, roll a distance 5 times and if the

distance is 3 feet, enter 15 feet).

4) Press [Scale]. The display will show

zeroes and the units of measurement

annunciator will begin flashing (

FT-IN for

Imperial Mode,

MM for Metric Mode).

5) If you do not want to change the units

of measure, skip to step 6. If you want

to change the units of measure, press

[M1+] until you reach the desired units.

6) Press [Scale] to begin setting the scale

distance. The left-most digit will

begin flashing. Press:

[M1+] to increment this digit,

[Subtract/Count] to decrement,

[Scale] to advance to next digit,

[Mode] to move back one digit.

7) Continue to press [Scale] until all dig-

its are set and the display returns to

zero. The scale is now stored.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare