Calculated-industries 3350 User Guide Bedienungsanleitung PDF herunterladen (Seite 4)

4 — PREXISO X2 USER’S GUIDE

HOW TO USE

Measuring conditions

The quality of the measurement depends on the surfaces to which you are

measuring. Strongly reﬂecting targets deﬂect the laser beam and cause mea-

suring errors. Non-reﬂecting, dark surfaces increase the measuring time.

Always begin by making a control measurement.

Measurement errors

Measuring errors are possible in case of:

• Colorless ﬂuids (e.g., water)

• Clean, translucent glass

• Styrofoam or similar semi-translucent surfaces

• Strongly reﬂecting targets that deﬂect the laser beam

• Measurements aimed at moving objects

For consistently accurate measurements

• Perform control measurements periodically.

• Perform control measurements before and after important measurements.

Switching on/off

(Key 1)

(Key 3)

• Switch on the device by pressing Clear/Off

(Key 1). The device shows the

Battery and Measuring Plane symbols until another key is pressed.

• Switch off the device by pressing Clear/Off

(Key 3) for 2 seconds. If no

key is pressed for 3 minutes, the device switches off automatically.

Clear key

(Key 3)

• Undo the most recent action by pressing On/Measure (key 3)

brieﬂy.

Adjusting the measuring plane

Rear measuring plane is the

standard setting.

• For measurement from front edge,

press Measuring Plane/Units

(key 4) brieﬂy.

• For measurement from rear edge,

press Measuring Plane/Units

(key 4) brieﬂy again.

The Front EdgeThe Rear Edge

MEASURES FROM:

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Calculated-industries 3350 User Guide Bedienungsanleitung Seite 4