Calculated-industries 3350 User Guide Bedienungsanleitung PDF herunterladen (Seite 7)

PREXISO X2 USER’S GUIDE — 7

TROUBLESHOOTING

• If the laser remains lit, or the value in the Main Display keeps changing,

ﬂashing, or showing “trc” you are in Continuous Measure mode. Press

On/

Measure

(Key 1) once to exit this mode.

• If the message Error does not disappear after switching on and off the device

repeatedly, contact Calculated Industries.

• If the message InFo appears with a number, follow the instructions in the fol-

lowing table.

No. Cause Remedy

204 Calculation error Measure again.

252 Temperature too high Let the device cool down.

253 Temperature too low Warm the device up.

255 Reception signal too weak, Change target surface (e.g., white paper).

measuring time too long

256 Input signal too high Change target surface (e.g., white paper)

257 Measuring error, Shadow the target area.

too much background light

258 Measurement outside Target is beyond range.

of the measuring range Move closer to target.

260 Laser beam interrupted Repeat the measurement.

SPECIFICATIONS

Measuring Range 4” (10 cm) to 100’ (30.5 m)

Accuracy +/- 1/8” (3 mm) or better over entire range*

Smallest unit displayed 1/16 (1 mm)

Laser class 2

Laser type 635 nm, < 1 mW

Automatic shut-off After 3 minutes

Continuous measuring Yes

Addition/Subtraction Yes

Area Yes

Volume Yes

Pythagoras (Indirect) Yes

Metric and Imperial Units Yes

Dimensions 4

x 2 x 1” (118 x 50 x 26 mm)

Battery life Up to 3,000 measurements

Weight 3.22 ounces (100g)

Temperature range:

- Storage -13°F to +158°F (-25°C to +70°C)

- Operation 32°F to +104°F (0°C to +40°C)

* In favorable conditions (optimal target surface, room temperature) for measurements up

to 33 feet (10 m) accuracy is +/- 1/16” (1.5 mm). In unfavorable conditions (intense sunlight,

weak reﬂective surfaces or large temperature variations), accuracy may deteriorate to ap-

proximately +/- 1/8” (3.0 mm) for distances above 33 ft (10 m).

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Calculated-industries 3350 User Guide Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Calculated-industries 3350 User Guide