Calculated-industries 3350 User Guide Bedienungsanleitung PDF herunterladen (Seite 5)

PREXISO X2 USER’S GUIDE — 5

Adjusting measuring units

Metric system is the standard setting.

• To change the unit, hold Measuring Plane/Units

(key 4) for several

seconds.

With every key press, the device switches to the next unit.

Possible units:

• meters with mm display

• feet-inch-fractions

─ main display up to 1/16 inch

─ secondary display up to 1/8 inch

• inch-fractions

─ main display up to 1/16 inch

─ secondary display up to 1/8 inch

Measuring

(Key 1)

• Press and release

On/Measure

(Key 1)

to light the laser.

• Aim active laser at target area.

• Press and release

On/Measure

(Key 1)

again to measure.

The device measures the distance and immediately displays the result in the Main Display.

Continuous measuring

This function enables speciﬁc, desired distances to be determined.

• Hold On/Measure

(Key 1) for several seconds. Continuous measuring starts,

and display shows “trc” (Trace).

• Press On/Measure

(Key 1) brieﬂy. Continuous measuring stops.

The value last measured appears in the Main Display.

FUNCTIONS

Add/Subtract

(Key 5)

Add:

• Measure the ﬁrst distance by pressing On/Measure

(Key 1).

• Press Add/Subtract

(key 5) once.

• Measure the second distance.

The device adds the second measurement to the ﬁrst measurement. Result shows in the

Main Display and the previous value in the Secondary Display.

Subtract:

• Measure the ﬁrst distance by pressing

On/Measure

(Key 1)

• Press Add/Subtract

(key 5) twice.

• Measure the second distance.

The device subtracts the second measurement from the ﬁrst measurement.

Repeat if required. The device displays the result in the Main Display and the previous value

in the Secondary Display.

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Calculated-industries 3350 User Guide Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Calculated-industries 3350 User Guide